Description

Torca EasySeal Pre-Formed Band Clamps, 2-Pack

Hold your exhaust system together with the Torca pre-formed band clamps 2-pack. It is most important to remember clamps at joints in an exhaust system are very important.  Therefore, clamps prevent leaks and ensure that the exhaust sounds and fumes are properly routed away from passengers.

There are two main types of exhaust clamps: U-bolt clamps and band clamps. This product is one version of the Band Clamp, it’s pre-formed and ready to for installation. Also, check out our flat (not formed) band clamp alternative.

Torca pre-formed band clamp for lap joints:

• Available in bright stainless or aluminized.
• Includes reaction block and force bar for positive even seal.
• Band conforms to surface irregularities.
• Pre-attached hardware, ready for installation.
• Will not damage or crimp flex or hard pipe.
• Joins any lap-joint connection
  • hard pipe to flex
  • hard pipe to hard pipe

Exhaust clamp options:

There are two main types of exhaust clamps: U-bolt clamps and band clamps. Indeed, this pre-formed band clamp is one version, it’s ready for installation. Wrap it around your pipe and fasten using the pre-attached hardware to get the job done quickly.

 

Now that you’ve selected your clamp don’t forget our flagship flex product that we make in house, HQ’s Exhaust Flex Pipe by Flexatube, check it out.

Steps To Install EasySeal Band Clamps

It is important to use the correct type of clamp for the application, using the wrong type of clamp can lead to leaks. Easily install this Exhaust clamp.  If the clamp becomes damaged or corroded easily replace it.

If you have questions contact sales, 248-689-7373.

1. Clean the pipes. Brush existing exhaust system components removing dirt, debris, or rust.
2. Measure the pipes. Measure the distance between the pipes where the clamp will be installed. This will help you determine the correct size of clamp to use.
3. Choose the correct clamp. It is important to choose the correct type for your application. For example, if you are connecting two pipes of different diameters, you will need to use a step clamp.
4. Install the clamp. The specific installation instructions will vary depending on the type of clamp you are using. However, in general, you will need to slide the clamp over the pipes and tighten the nuts or bolts until the clamp is secure.

Factors when choosing an exhaust clamp:

• The type of clamp (U-bolt or band clamp).
• The size of the clamp (to fit the pipe diameter).
• The material of the clamp (steel or stainless steel).
• The strength of the clamp (to withstand vibration and heat).

Finally, consider routine inspection and replace exhaust clamps or other exhaust system components. Therefore, using the right type of clamp and inspecting your Torca pre-formed band clamp regularly, you can keep your exhaust system in good working order and prevent leaks.

Torca has been engineering superior Torca joining solutions for the automotive and industrial exhaust market for almost 50 years. As the inventor of the original reaction block technology that set the industry standard for exhaust clamp sealing performance, Torca exhaust clamps continue to focus on product enhancements and innovation. Proudly developed and manufactured to OE specifications, Torca products provide the best performance, with the least material, for maximum efficiency to the overall system.

Made in the USA by Torca, link to their site here: https://www.normaamericasds.com/product/torca-easyseal

In some cases, online orders may be filled by non-Torca solutions.